Ask about our referral program

Intake Vents

Inadequate intake is the #1 cause of attic ventilation system failure. Specifically, inadequate intake results in extreme heat buildup in the summer and severe weather infiltration and moisture problems in the winter.

Common Features

Proper vent chutes should be installed before blown-in insulation to prevent choking your intake system. A good rule of thumb is to place one between each set of rafter tails in order to maximize intake air.

If maintenance free vinyl/metal under eave panels are used, the vented panels should be installed continuously around the under eave portion of the house.

If the under eave width prohibits the use of cornice or strip vents neveruse an exhaust louver as an intake vent. The most logical solution would be to install SV-10 Starter Vent or the Deck-Air Roof Deck Installed Intake Vent.

Available Models

Lomanco Deck-Air Intake Vent
Lomanco SV-10 Continuous Drip Edge Soffit Vent
Lomanco C-Series Cornice Vents
Lomanco Continous Soffit Vents
Lomanco Cirk-L-Vents

Go Back